Bestron DC30BC Bedienungsanleitung Seite 44

1. The motor housing is equipped with a mounting ring. Insert the wiring through the canopy and place the
canopy on the mounting ring so that the holes in the canopy fit with the screw holes in the mounting ring
(see figure O).
2. Take the 3 screws and spring rings (No. 8 in the figure under 'OPERATION - General') and firmly tighten
the canopy to the motor housing (P).
The canopy has now been installed correctly to the motor house.
MONTAGE - Installing the fan blade holders onto the fan blades
The fan blades of this ceiling fan are asymmetrical in shape. Although the blades can be installed both with
the white as the wood-colored side pointed downwards, it is recommended to point the wood-colored side
downwards. Pointing the white side downwards can affect the air circulation due to the reverse shape of
the fan blades.
1. Take a fan blade holder and place it onto a fan blade as shown in figure Q.
2. Insert a screw with a red ring through the fan blade holder and fan blade.
3. Place a cap nut under the fan blade, then tighten the screw into the cup nut.
MONTAGE - Installing the fan blades onto the motor
1. The screws for installing the fan blades have already been screwed into the motor housing. Unscrew
them and remove them from the motor housing (see figure R).
2. Take a fan blade with fan blade holder and screw it to the motor housing using two screws (S).
O
Q
44
P
EN