Bixpy PP-333 Bedienungsanleitung Seite 6

SYNCING YOUR REMOTE TO YOUR POWER PACK
Bixpy Remotes can be programmed to work with one Power Pack or multiple Power Packs. Follow
the procedure below to program your remote to work with your Power Pack.
i.
ii.
(3)
(1)
To confirm pairing, click your stop button once and you should hear a double beep.
Hint: You do not need a Thruster attached to your Power Pack to sync your remote.
Place your kill switch on your Power Pack and make sure you have
power in your Power Pack (at least one LED light should be on).
Click the buttons on your remote in the following order in moderate
speed
• Click the Stop Button (1)
(2)
• Forward Button (2)
• Reverse Button (3)
• Stop button (1)
For video instructions, visit: www.bixpy.com/myremote
E
3 times
1 time
1 time
1 time
5