Philips ICE PREMIUM HP6503/10 Bedienungsanleitung Seite 17

Problem
The skin cooler
is not cold
enough.
The pivoting
cooling head of
the leg skin
cooler does
not move.
It is not
possible to
remove the
epilating head.
4203.000.3758.1 indd 17
All manuals and user guides at all-guides.com
Possible cause
You have applied
too much
pressure to the
appliance
You did not
freeze the skin
cooler long
enough.
You did not put
the skin cooler in
the freezer or
freezing
compartment.
The skin cooler
did not touch
the skin.
The pivoting
cooling head is
frozen.
You did not
move the
epilating head in
the right
direction.
EnglisH
Solution
Do not use any pressure when
moving the appliance over skin
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the
skin cooler in the refrigerator.
Make sure the skin cooler is
always in proper contact with
your skin during epilation.
Pass the skin cooler over your leg
a few times to make it pivot again.
Always make sure the outside of
the skin cooler is completely dry
before you freeze it.
Press the release button and
move the epilating head in the
direction of the arrow (fig. 14) to
remove it.
17
23-10-2006 10:04:06