Assembling/Changing The Battery; Operation; To Do/Check Before Each Use - BASETech 1666211 Originalbetriebsanleitung

3. Fully insert the blade (teeth in upward cutting direction) into the groove and release the clamping lever (Ú Fig. 3).
4. After installing, make sure that the blade is securely held in place by trying to pull it out.
Fig. 3
b) Assembling/changing the battery
The battery pack fits only one way. Do not force it into the battery compartment (4).
1. Slide the battery pack into the battery compartment until it "clicks" in place.
2. To remove the battery, push the locks on the side of the battery and pull it out.

8. Operation

a) To do/check before each use
1. Wear safety glasses and protective gloves. Further hearing and dust protection is recommended.
Adequate protective clothing will reduce personal injury by flying debris or accidental contact with raw surfaces.
2. Do not use any attachments or accessories not recommended by the manufacturer. It may result in serious
personal injury.
3. Check if the accessory is fixed correctly (ÚInstalling blades).
26