Herunterladen Inhalt Inhalt Diese Seite drucken

Setup And Preparation; Installing Blades - BASETech 1666211 Originalbetriebsanleitung

Akku-stichsäge 10.8 v
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. Setup and preparation

Switch the product off and remove battery pack before assembly, cleaning, adjustments, maintenance,
storage and transportation.
Always wear gloves when handling the product.
a) Installing blades
Always clean out all foreign matter residues adhering to the blade and/or blade holder. Failure to do so may
cause insufficient tightening of the blade, resulting in a serious personal injury.
Installation must be carried out when the battery pack is removed from the product to prevent injury.
The blades are not supplied with the product. Use undamaged T-shank blade that is appropriate for
the cutting task. Using non-T-shank blades may result in blades coming loose from the tool, resulting in
personal injury or property damage (Ú Fig. 1).
1. Remove the battery pack from the product (if already installed).
2. Turn the clamping lever (2) clockwise and hold it in position (Fig. 2).
Fig. 1
Fig. 2
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis