Maestro MR-1811 Bedienungsanleitung Seite 3

Picture 1
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery power is low.
Insert or replace new battery.
9. If there is error on display or can not turn off the scale for a long time, please take off the
battery for about 3 seconds, then install it again to remove soft-fault. If you can not resolve
the problem, please contact your dealer for consultation.
10. Do not use it for commercial purpose.
Power
2xAAA (not supplied)
To insert the batteries, open the cover battery compartment and install batteries observing
the polarity.
Battery replacement
Open the battery compartment. Remove the old batteries/ Install new observing the
polarity.
Weighting step
-Below the weight indicator, press "ON/OFF/TARE" key to power on, the scale will show
zero "0"on the display after 2 seconds.
-Place the container on the scales, LCD will show the weight of container.
-Press the "TARE" key, LCD will display zero. Clear the weight of the container, add the
food into container, the net weight will appear on the display.
Press the "ON/OFF" key again to power off.
Error display
-When the screen shows " LO ", it means that the power is low, please change the batteries
as soon as possible.
-When the scales are overloaded, "EEEE" will appear on the display.
-When the scales are overloaded(more than 5200g), "O-Ld" will appear on the display.
(Model 1803).
3