Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How do I assemble this product?
Turn the machine over onto its head.
Insert the Axle through the pre - drilled holes in the foot (Fig.3).
Select the support A and B which are identified by the letter
stamped on the actual support.
Insert the foot into the body (Fig.4).
Put the cotter pin in to the pipe hole
Tighten the reamer knob. The reamer knob has a safety switch please ensure the
knob is tightened or the motor will not activate.
NOTE : It is dangerous to use the machine without the hopper.
How do I use this product?
Before using the machine, read the instructions thoroughly and acquaint yourself
with the features of the machine.
Before inspecting or servicing any part of the appliance, switch off, pull the plug
from the mains and make sure that all moving parts have come to a complete stop.
1. Inspect the material to be shredded before starting. Remove any objects or
debris that could be thrown, jammed or become entangled in the blades.
Foot A
Axle
Reamer knob
Foot B
Fig.3
Insert
Fig.4
Fig.6
Werbung
