General Safety Instructions - monzana MZW E240T Bedienungsanleitung

General Safety Instructions

ATTENTION!
•Please check the VESA hole spacing between the mounting holes on your screen
BEFORE mounting.
•Tighten the screws firmly, but do not tighten them. Overtightening the screws can
damage the screws/structure and reduce their holding force.
•Do not begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions regarding
any of the instructions or warnings, please contact your local distributor
•This product was designed to be installed and used ONLY as specified in this manual.
Improper installation of this product may cause damage or serious injury
•This product may only be assembled / installed by the technical staff.
•When mounting on the wooden beams wall, make sure that the fastening screws are
anchored in the center of the beams. It is highly recommended to use a beamfinder.
•Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
•This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury
Due to the numerous TV types on the market, we cannot match
our screen mounting material to every screen model. Therefore
it may happen that the screws supplied may be too short or too
long for your TV/monitor, despite their variety. We ask for your
understanding that we cannot cover all possibilities due to many
screen models or manufacturers.
Disposal:
At the end-of-life of your item, please dispose valuable raw materials for appropriate recycling. If you are not
sure how to handle it in a correct way, please contact your local disposal or recycling centre for advice.
www.Deuba24online.de
5