Additional Safety Warnings - Arbortech MIN.FG.900.60 Bedienungsanleitung

ADDITIONAL SAFETY WARNINGS

SPECIFIC FOR SANDING OPERATIONS:
a. Do not use excessively oversized sanding disc
paper. Follow manufacturers recommendations,
when selecting sanding paper. Larger sanding
paper extending beyond the sanding pad presents
a laceration hazard and may cause snagging,
tearing of the disc or kickback.
b. Adjust the speed as recommended for sanding
applications. High speed sanding presents
laceration and burning hazard.
ADDITIONAL SAFETY
WARNINGS
Wear hearing protection; Wear eye protection; Wear
dust mask; Wear protective gloves.
a. Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage
or may cause an electric shock.
b. Release the On/Off switch and set it to the off
position when the power supply is interrupted,
e. g., in case of a power failure or when the
mains plug is pulled.
c. Do not touch grinding and cutting discs before
they have cooled down. The discs can become
very hot while working.
d. Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.
KNOWING YOUR TOOL
PRODUCT DESCRIPTION AND
SPECIFICATIONS
Read all safety warnings and all
instructions, Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
CE - Declaration of conformity:
Arbortech declares that the product MIN.FG.900.60
and MIN.FG.910.60 described in this manual under
"Technical Specifications" is manufactured in
compliance with EN 60745 standardised documents,
EMC 2014/30/EU and RoHS 2011/65/EU directives.
Technical file in conformity with Machinery Directive
2006/42/EC at: Arbortech PTY LTD | 67 Westchester
Road, Malaga, WA 6090
Sven Blicks
General Manager
INTENDED USE
The Mini Carver/Mini Grinder Trade is intended for
grinding, carving, and sanding of metal, stone and
wood without use of water.
Note: Text, diagrams and data are correct at time of
printing. In the interests of continuous improvement of
our products, technical specifications are subject to
alteration without prior notice.
For working with applications on materials that create
dust use dust extraction accessories.
Voltage
Power rating
Frequency
Protection class
Rated speed
Tool diameter
Mounting bore size
Mounting screw size
Weight
Vibration emission (k=1.5)
Noise emission (k=3.0)
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories or
insertion tools or is poorly maintained, the
vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure
level over the total working period. Identify additional
safety measures to protect the operator from the
effects of vibration.
230 V
1000 W
50 Hz
II II
6000-19500 Rpm
54 mm
9.5 mm
M5 mm
2.35 kg
7.31 m/sec2
96 dB(A)
English 4