Herunterladen Inhalt Inhalt Diese Seite drucken

Safety During Operation; Intended Use - Ravanson CS-20S Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Despite proper use of the device and following all safety guidelines,
some specific residual risks cannot be completely eliminated.

SAFETY DURING OPERATION

Before starting the device, insure that the plug and the cord were
dry.
Do not place the device in close proximity to open flames or other
heat source.
Do not use device in the rooms where gas or other volatile or
inflammable substances can occur.
Do not insert any objects into the opening of the device's body.
Keep away from direct sunlight, humidity, raindrops and snowflakes.
Protect from humidity!
Do not submerge in water!
Use only in vertical position!
ATTENTION! Danger of overheating! Do not cover the ventilation
hole. Please ensure proper device distance from walls and other
objects to allow for the free circulation of air.
Do not fill liquid or ice directly inside the unit.
Protect device and power cord from heat and humidity.
NOTE!
The manufacturer is not liable for the use does not conform to specifications, or improper handling.
II. INTENDED USE
The device is designated for short-term storage of food cooled in the domestic refrigerator and for cooling
drinks. The cooling system is based on the semi-conducting Peltier cells without the compressor and coolant.
ATTENTION!
The device is not designated for cooling warm or hot food!
NOTE!
The fridge cools food products to about 12 - 15°C below ambient temperature. The device is not a substitute
of a domestic refrigerator.
The cooling temperature depends on multiple factors, e.g. ambient temperature, quantity of cooled products,
products' temperature.
In favorable conditions, temperature decrease by 12 - 15°C below the ambient temperature may take place
in about 2 hours of continuous operation. (min + 8°C)
ATTENTION!
The fridge with a heating function is not designated for heating products. It can be used solely for extending
the cool-down time for products pre-heated in designated devices.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis