Cleaning And Maintenance - Franke FSMS WALL F42 Gebrauchsanleitung

formation on how to re-cycle
this product, please contact
your local municipal offices,
local waste disposal service
or the shop in which the
product was purchased.
2. USE
• The suction hood has been designed
exclusively for domestic use, to elim-
inate kitchen odours.
• Never use the hood for purposes
other than those for which it was de-
signed.
• Never leave high flames under the
hood when it is in operation.
• Adjust the intensity of the flame so
that it is directed onto the bottom of
the cooking pan, making sure it does
not wrap around the sides.
• Deep-fryers must be kept under con-
stant supervision when in use: the oil
may catch fire if it gets too hot.
3. CLEANING AND
MAINTENANCE
• The active carbon filter cannot be
washed or regenerated and must be
replaced after every 4 months of op-
4. CONTROLS
Key Functions
T1 It turns the motor on at speed one.
Speed
It turns the motor off.
T2 It turns the motor on at speed two.
Speed
T3 If pressed briefly, it starts the motor at speed three.
Speed
Pressed for 2 seconds. It activates speed Four with a timer set to 6
minutes, after which it returns to the speed that was set previously.
Suitable to deal with maximum levels of emissions of cooking fumes.
L It turns the lighting system on and off.
Light
Attention: Key T1 switches off the motor, always passing through speed one.
eration or, more frequently, in case of
very intense use (W).
W
• The grease filters must be cleaned
every 2 months of operation or more
frequently in case of very intense use
and can be washed in a dishwasher
(Z).
• Clean the hood using a damp cloth
and a neutral liquid detergent.
• For external and internal cleaning of
the hood avoid alcoholic or silicone
products.
If the product or one of its parts is made
of stainless steel, use specific non-ab-
rasive products for cleaning and follow
the lines of the satin finish during clean-
ing.
LED
On
-
On
Fixed
Flashing
-
9