Maestro MR556 Bedienungsanleitung Seite 8

click sound.
- Choose proper accessories for your products.
- Insert the shank end of each accessory in the hole provided in the
mixer case. Slightly pressing fix the accessories in the holes until it
clicks.
- Be sure that the accessory for mixing dough marked with a ring is
inserted in the bigger hole.
- Connect the electric cable plug to the mains.
- Switch on the mixer and choose the required speed with switch (4/
Picture1).
ATTENTION! Avoid the contact of the liquid being mixed with the
mixer case.
- After the ingredients reach the required consistency move the
switch to position «0» OFF.
Before removing the accessories make sure that movable parts are
completely stopped and disconnect from the mains.
- Press button (6/ Picture1) up to remove the accessories.
- Be careful the accessories can be removed only when the switch
is in position «0»-OFF only.
After terminating the use put the switch to position «0» - OFF and
disconnect the mixer from the mains.
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of
moving parts.
8