Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
If the primary headset terminates the call, the active conference is also terminated on all of the
other headsets. However, the secondary headsets remain logged onto the base station of the
primary headset. Repeat the section «Holding a conference call» for a new conference.
Participants can also leave an active conference. All they have to do is press the «Call acceptance»
key on their headset briefly. The other participants remain in the conference.
Logging off from the master base station
To log off completely from the conference mode and from the master base station, reconnect the
headset to its original base station.
Technical data
Headset Fox FX 810 DECT
Operating conditions:
0˚C to +40˚C; max. 95% relative humidity (non-condensing)
Call control:
Multifunction key for: accept, end and reject call; docking operations can also
accept and end calls
Volume control and mute microphone: Control on the headset
Display signal:
LED shows call status, pairing status and other events.
Audio signals:
Audio signals indicate incoming calls, low battery charge, volume, muting and
other events.
Sound quality:
DSP noise cancelling, echo cancellation, tone control, narrow-band audio
Charging:
When docked onto the Fox FX 810 DECT base station.
Standard for wireless communication: (CAT-iq) EU DECT and US DECT
DECT range:
EU DECT: up to 100 m from the Fox FX 810 DECT base station to the headset.
US DECT: up to 100 m from the Fox FX 810 DECT base station to the headset.
DECT frequencies:
US DECT: 1.92 – 1.93 GHz. EU DECT: 1.88 – 1.90 GHz
Wearing styles:
Headband and ear clip
Microphone arm design:
medium-length microphone with ambient noise suppression
Loudspeaker:
broadband loudspeaker
Microphone:
Microphone with noise cancelling
Headset battery
Battery type:
lithium-ion polymer
Battery capacity:
300 mA/h, typical
Talk time:
Up to 8 hours
Battery service life:
At least 1000 charging cycles
Standby time:
At least 50 hours
Operating temperature:
-20˚C to +60˚C.
Charging time:
20% charge in less than 20 minutes, 50% in less than 45 minutes, full charge
in less than 3 hours
Shelf life of the battery:
The headset battery retains its charge for at least 6 months when it is
switched off before the battery has to be recharged.
28
sup fv fox810 anleitung duo.indd 28-29
Base Station Fox FX 810 DECT
Operating conditions:
0˚C to +40˚C; max. 95% relative humidity (non-condensing)
Charging dock:
Suitable for the Fox FX 810 DECT series of headsets
Desk phone sockets:
RJ-11 for handset, RJ-11 for telephone (or headset socket), RJ-45 for AUX
(for EHS adapter or lifter)
Disposing of the product
Please dispose of the headset in accordance with local regulations and use the available recycling facilities. Do not
dispose of the headset together with domestic waste. Keep the headset away from fire since the battery could other-
wise explode. The battery can also explode if damaged.
29
21.07.17 15:43
Werbung
Inhaltsverzeichnis
