LED and Button
LED
Reset
Long press for 2
WPS
Press to take
FAQ
Q1: What can I do if the login window does not appear?
A1: If your computer is wirelessly connected, make sure that you have connected to the
extenders SSID.
A2: If your computer is connected via an Ethernet cable, please make sure that the
connection is stable.
A3: Make sure your computer is set to obtain an IP address and DNS server address
automatically.
A4: Verify that http://cudyre.net ( or http://192.168.10.254/) is correctly entered in the
web browser and press Enter
A5: Reset the device and try again
Colour
Status
/
Off
Red
Flash
On
Purple
On
Blue
On
/
Off
Blue
Flash
On
/
Off
Blue
Flash
On
Press and hold Reset button for 2 seconds until all
seconds
the LED lights turn on and off.
Press the WPS button until WPS LED start flashing.
effect
Indication
No host Wi-Fi configuration
Connecting / not connected to host Wi-Fi
Connected to host Wi-Fi, signal is weak
Connected to host Wi-Fi, signal is fair
Connected to host Wi-Fi, signal is good
Not connected to host Wi-Fi
The system is booting or upgrading
System startup is complete
Not connected to host Wi-Fi
WPS in progress
Connected to host Wi-Fi
8