Method One: Using WPS Button
1. Plug the extender next to your router and wait until the
2. Press the WPS button on your router, and then press the WPS button on the
extender withing 2 minutes.
3. Then the
LED will start to flash, wait until the
on, which means the extender connects to your existing host WiFi network.
If the
LED does not turn solid on after 2 minutes, try step 2 again. If still not work, try
Method Two: Using Web Browser, or contact our support@cudy.com.
Flash
Press 1 second
LED and
Flash
Pairing proccess
Flash
Connection proccess
4
LED turns solid on.
Solid On
LED turn solid
Solid On
Solid On