Cudy RE1800 Benutzerhandbuch Seite 7

3. Follow the step-by-step configuration to the end. After configuration, below
page would pop up. Then wait the
minutes.
Note: Please check the information on the screen and confirm that the password
is the same as the wifi password of the router. Otherwise, the extender will not be
able to connect to the router Wi-Fi.
4. Relocate the extender halfway between your router and the Wi-Fi dead zone,
find a good place to plug it according to the
Host WiFi Network
Router
Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
LED turns solid ON, it may take 1 or 2
LED.
Extender
Halfway
7
Clients
Extended Network