Getting Started - Kruger & Matz FLOW 6 Bedienungsanleitung

getting staRted

step 1: Open the back cover.
step 2: With the display down, the upper slot supports microSD OR
nano SIM card. The lower slot supports nano SIM. Insert the cards as
indicated on the 2a illustration (with the chip/pins facing downwards).
Pay attention to insert cards with the cutouts in the right direction.
Note: to remove nano SIM from the lower slot pull the tray crimp (as
indicated on the 2b illustration).
step 3: Install the battery. Make
sure to align the connectors on
the battery with the pins in the
battery compartment.
step 4: Close the back cover.
2a
2b
22
/
User's manual
1
2
3