Public Area Usage Set-Up-Rc Pairing - VITRA V-Care Prime Bedienungsanleitung

Public area usage setup- RC Pairing
RC Pairing
This product used radio frequency for
communication between the main unit
and the remote control.
So pairing between the main unit and
the remote control is necessary.
Remote control is designated with an
ID code and the pairing allows the
remote control to imprint it's ID to the
main unit.
Step 1. Press and hold STOP +
FRONT WASH buttons on the side
control for 3 seconds.
Be noted that when setting ID, no one
should be sitting on the product.
There will be a beep and green LED
on the STOP button in the side control
will blink. This means that the product
is in RC Pairing mode.
Step 2. Press and hold + and - buttons
on the remote control for 3 secs.
+
When setting completed the entire level
indicator on the remote control will blink
3 times.
A single beeping sound will indicate
that the RC Pairing is completed.
42
EN
Press and hold
for 3 seconds
Press and hold
for 3 seconds