VITRA V-Care Prime Bedienungsanleitung Seite 42

Additional functions
When the battery reaches
Battery
approximately 10% of its
life
indication
capacity, the LED lights in
the remote control blinks to
warn the user.
The lights on the remote control do not blink during
stand by.The blinking happens only during use.
Press FEMALE WASH + STOP
Child
button on the right side-
Mode
control for 3 seconds to
perform Child Mode.
(Works whether or not the
sensor senses the user)
+
Performs for 40 seconds with oscillation at level 1
water pressure and level 5 nozzle length.
Press NOZZLE POSITION+
Silent
WATER PRESSURE button
Mode
on the remote control for 3
seconds to go into Silent Mode
+
To stop Silent Mode, press NOZZLE POSITION+
WATER PRESSURE buttons on the remote control
for 3 seconds again.
Press OSCILLATION +
Ambiance
PULSATION button on the
Light
remote control for 3 seconds
to close Ambiance Light and
stop the usage.
+
Please repeat the same sequence to start the
Ambiance Light usage.
Press and hold
for 3 seconds
Press and hold
for 3 seconds
Press and hold
for 3 seconds
41
Press the STOP/POWER
Power
button on the right
ON/OFF
side-control for 3 seconds to
turnon of turn off V-Care Prime.
Press and hold
for 3 seconds
Turning off with the STOP/POWER button does not
cut the electricity completely.To cut electricity
completely, use the power switch located onthe
buttom left side of V-Care Prime.
Press WATER TEMP+SEAT
Decalcification
TEMP button on the remote
Cycle
control for 3 seconds to
perform Decalcification.
(Works only when there is
no one sitting on the seat)
+
None of the other function works during
Decalcification process.
Please start pairing by opening
Connectivity
mobile application and follow
the steps described by mobile
application
Press the quick release buttons
Quick
together on the right and left
Release
side control panel to move the
main unit through upside.
QUICK RELEASE BUTTONS
EN
Press and hold
for 3 seconds