Trouble Shooting - yuna FEDORA EKS130 Bedienungsanleitung

6. Trouble shooting

Possible cause
➢ The plug of the appliance is not
connected to the socket.
➢ The plug has become loose.
➢ The socket is not supplied with
energy.
➢ The fuse is switched off.
➢ The voltage is too low.
➢ Incorrect energy supply.
T
➢ The appliance has been switched off
for a while.
➢ Too much or too hot food in the
appliance.
➢ Doors opened too often or too
long.
➢ The door was frequently opened.
➢ The door is not properly closed.
➢ Encrusted ice inside the appliance.
➢ The current temperature setting is
too warm
➢ Warm or hot food inside the
appliance.
➢ The appliance is overfilled.
➢ The door seals are damaged.
➢ The door is not properly closed.
➢ The door seal is damaged or soiled.
Malfunction
T
HE APPLIANCE DOES NOT WORK AT ALL
T
HE COMPRESSOR DOES NOT WORK AT ALL
HE COMPRESSOR OPERATES FOR TOO LONG
U
NSATISFACTORY COOLING CAPACITY
S
TRONG FORMATION OF ENCRUSTED ICE
Measure
➢ Check the corresponding socket by
connecting it with another appliance.
➢ Check the fuse box.
➢ Compare the data on the model
plate with the data of your energy
supplier.
➢ Check the energy supply.
➢ The appliance needs some time to
reach the preset temperature.
➢ Remove any hot food.
➢ Do not open the door too
often/too long.
➢ Select a different setting if necessary.
➢ Check the door/door seals.
➢ Defrost the appliance.
➢ Close the door.
➢ Clean/replace the door seal.
.
.
.
.
.
59