Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Noise Development; Technical Data - BOMANN SMS 349 CB Bedienungsanleitung, Garantie

Stabmixer-set
Vorschau ausblenden Andere Handbücher für SMS 349 CB:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Of course, you can chop also other foods that are not specified
herein. In order to determine the maximum time for a type of
food that is not specified herein, compare it with the hardness
of another type of food provided in the table, i.e. an Apple has
the same insistence of onion.
5. Seal the bowl again with the lid; the recesses on the lower
edge of the lid and on the upper edge of the bowl must
interlock.
6. Place the motor casing on the upper opening of the lid and
fasten the multi-chopper by turning it to the right.
WARNING:
• Always pull the plug out of the socket before cleaning!
• Under no circumstances should you immerse the motor housing in
water in order to clean it. Otherwise this might result in an electric
shock or fire.
• The multi-purpose knife and the knife on the stick blender are very
sharp. Handle these parts with care! There is a risk of injury!
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
To clean thoroughly, detach the stick blender or egg whisk
from the motor housing.
Removable parts which have come into contact with food
(tool and container) can be cleaned in soapy water. You
can add a commercially available washing-up liquid.
Rub the outside of the motor casing with a moist towel to
clean it when necessary and then wipe it with a dry cloth.
After cleaning, store the mixing rod in the accessory holder
supplied (see illustration D). Tighten the attachments and
the mixing rod with one clockwise turn to prevent the at-
tachments from falling down.

Noise development

The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 88 dB(A) (no limit)
42
All manuals and user guides at all-guides.com
7. Only connect the machine to a properly installed safety
8. Press one of the buttons on the two-level control switch.
9. After use: Release the motor housing from the multiple
10. Remove the lid and pull the multi-blade out carefully.
11. Pour the contents of the beaker into a container or plate.

Cleaning and Maintenance

Model: .......................................................................SMS 349 CB
Power supply: ......................................................... 230V~, 50 Hz
Power consumption: ........................................................... 200 W
Protection class: .......................................................................... II
Filling quantity: .........................................................0.1 – 0.5 Litre
Net weight: ..............................................................approx. 1.1 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
socket. Allow the multi-chopper to stand on the surface dur-
ing operation until you remove the multi-blade (7). Hold the
multi-chopper firmly with a hand.
chopping machine by turning it and then remove it from the
lid.
WARNING:
The multi-blade is very sharp! Danger of injury!

Technical Data

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis