WOLPERTECH WT 400 F Originalbetriebsanleitung Seite 21

be replaced by the manufacturer. Do not execute any
repair yourself under any circumstances.
Protect the feeder cable from excessive temperatures,
oil and sharp edges.
Unplug the device prior to submersion, upon termi-
nation of operation, in the course of defect removal
and prior to performing maintenance procedures.
If the pump is in operation, neither people nor animals
can be present or plunged in the pumped liquid (e.g.
pools, cellars, etc.).
The pump must not in any case run without fillings.
Do not leave the pump unattended while in operati-
on in order to prevent subsequent damages caused
by eventual malfunctions. Make sure to disconnect
the device from the grid if you do not plan on using it.
The temperature of the drained liquid must not
exceed +35 °C.
If the lubricant escapes the fluid could become
contaminated.
If the pump is used in ponds, wells, etc. and appropri-
ate pumping stations, standards valid for pumps in
the given country must unconditionally be observed.
The user is responsible to third parties if pump (dum-
ping stations, etc.) is used.
Operation
Automatic switch-off mechanism
Adjust the automatic pump switch-off mechanism
with a flat suction box with a time delay of app. 15
seconds
The automatic switch-off mechanism will prevent the
pump from being switched off immediately after the
water level has dropped under the contact surface of
the electronic switch sensor; this also applies if the
switch with the sensor is not in the continu
The pump must not in any case run dry until
the automatic switch-off mechanism stops.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Just in Time cannot be held responsible for damages
incurred in consequence of unqualified installation or
unskilled handling of the pump.
The device has to be checked on a regular basis to
ensure perfect functioning.
Let us refer to the fact we do not assume any respon-
sibility – according to standards in force – for damage
eventually caused by our appliances in the below-
mentioned cases:
• Unprofessional repairs executed by unauthorised
service centres;
• Use in conflict with the designed purpose, or failure
to observe the use as designed;
• Pump overload with a continuous run;
• Damage as a result of icing or any other fault caused
by climatic influences;
• Identical regulations apply for accessory parts.
To prevent damage (such as flooded rooms, etc.) as a
result of faulty pump operation (failure or fault) the ow-
ner (user) is obliged to take reasonable safety measures
(alarm assembly, spare pump, etc.).
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference
Serial No.
Art. No
Year of production
ENGLISH
17