Operation - cecotec GRANDHEAT 2590 BUILT-IN STEEL BLACK Bedienungsanleitung

ENGLISH
Img. 12.
Install the microwave in the cabinet. Make sure the back of the device is locked by the mounting
plate. Do no trap the power cord.
Fig. 13.
Open the door, fix the microwave onto the cabinet with screw B through the installation hole.
Then, fix the plastic cover onto the installation hole.

4. OPERATION

Clock setting
When the device is plugged in, it will beep once and the display will show "0:00".
Press Clock/Timer to set the time. The hour digits will blink.
Turn the knob to set the desired hour, from 00-23.
Press Clock/Timer. The minutes digits will blink.
Turn the knob to set the desired minutes, from 00-59.
Press Clock/Timer to save the time settings. ":" will flash and the time will light.
Note:
If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, press " Stop/Clear ", to go back to the previous status
automatically.
Microwave cooking
Press Microwave/Grill/Combi once. "P100" will be displayed on the screen.
Press Microwave/Grill/Combi several times or turn the knob to select the microwave power:
"P100", "P80", "'P50", "P30" or "P10".
Press Start/+30sec/Confirm to confirm.
Turn the knob to set the desired cooking time. The set time should be 0:05-95:00.
Press Start/+30sec/Confirm to start cooking.
Example: Cooking at 80 % microwave power for 20 minutes.
Press Microwave/Grill/Combi once. "P100" will be displayed on the screen.
Press Microwave/Grill/Combi again or turn the knob to select 80 % microwave power.
Press Start/+30sec/Confirm to confirm. The screen will display "P80".
Turn the knob to set the desired cooking time: "20:00".
Press Start/+30sec/Confirm to start cooking.
0---1 min: 5 seconds
1---5 min: 10 seconds
5---10 min: 30 seconds
66
GRANDHEAT 2590 BUILT-IN STEEL BLACK