i.safe MOBILE M93A01 Bedienungsanleitung Seite 11

INSERT/REMOVE microSD CARD
DANGER
An incorrect procedure in explosion hazardous areas poses a risk of death or severe injuries! Only
open the device outside of explosion hazardous areas to insert or remove the microSD card.
NOTICE
Proceeding incorrectly when inserting/removing the microSD card can damage the device
and the microSD card. Switch off the device before inserting or removing a microSD card. Do
not charge the device while inserting or removing a microSD card.
easy to install
Open the IP-plug for microSD.
Insert the microSD card into the slot provided. The device has a slot for a microSD card up to
512 GB. The slot is marked "microSD".
Close the IP-plug.
CHARGING
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the device outside of explosion hazardous areas. Do not charge the device in the
vicinity of flammable substances.
NOTICE
Incorrect charging can cause damage to the device. Please note the following when charging:
Only charge the device using the i.safe PROTECTOR 2.0 USB-C Cable supplied or with the
i.safe PROTECTOR 3.0 Magnetic Charger Cable supplied.
Only charge the device at ambient temperatures between +5 °C to +35 °C (+41 °F to +95 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
EN 11