Safety Instructions - LD Systems RSMP Bedienungsanleitung

This symbol indicates hazards that can cause electric shock.
This symbol indicates danger points or dangerous situations.
This symbol indicates hazards due to hot surfaces.
This symbol indicates hazards due to high volumes.
This symbol indicates a device that does not contain user-replaceable parts.
This symbol indicates supplementary information on the operation of the product.

SAFETY INSTRUCTIONS

DANGER:
1. Do not open or modify the device.
2. If your device no longer functions properly, if liquids or objects have entered the
inside of the device, or if the device has been damaged in any other way, switch it
off immediately and disconnect it from the power supply. This device may only be
repaired by authorized specialists.
3. For devices of protection class 1, the protective conductor must be connected
correctly. Never interrupt the protective conductor. Devices of protection class 2
do not have a protective earth conductor.
4. Make sure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be put into operation if it shows obvious damage.
2. The device must only be installed in a de-energized state.
3. If the power cable of the device is damaged, the device must not be put into operation.
4. Permanently connected mains cables must only be replaced by a qualified person.
4