Herunterladen Diese Seite drucken

Theben SOTHIS 715 Anleitung Seite 2

Hygrostat

Werbung

Beachten Sie die technischen Angaben auf dem Gerätetypenschild/ Technical data on device nameplate may vary - please check/ Veuilliez compte des techniques différentes sur la plaque
de l'appareil/ Gelieve op afwijkende technischekenmerken letten, deze staan op de kenplaat van het aan te sluiten component / Collegare elettricamente l´igrostato secondo le istruzioni
indicate sulla targhetta/ Observe las especificaciones técnicas en la placa del aparato
D
SOTHIS 715
Technische Daten
Typ 1 C nach
Fühlerelement:
PA-Faden
EN 60730
5 (0,2) A 250 V~
Entfeuchten
2 (0,2) A 250 V~
Befeuchten
IP 30 nach EN 60529
Schutzart
II
nach EN 60335
Schutzklasse
nach entspr. Montage
30 - 100 % r.H.
Einstellbereich
nicht kondensierend
Technische Verbesserungen vorbehalten/ Subject to technical alterations/ Sous réserve de modifications techniques/ Technische wijzigingen voorbehouden/ Seguire scrupolosamente le
indicazione tecniche/ El termostato puede incorposar mejoras
Die auf der Skala aufgedruckten Prozentwerte sind nur Richtwerte.
The figures printed on the scala are approximate.
Les températures indiquées sur l'échelle du bouton de réglage n'ont qu'une valeur indicative.
De op de schaalverdeling weergegeven percentages zijn enkel richtwaarden.
I valori indicati sulla scala prodotto hanno carattere indicativo.
Los números impresos en la escala son sólo orientativos.
Serviceadresse
D
Theben AG
Hohenbergstr. 32
72401 Haigerloch
DEUTSCHLAND
Fon +49 (0) 74 74/6 92-0
Fax +49 (0) 74 74/6 92-150
Hotline
Fon +49 (0) 74 74/6 92-369
Fax +49 (0) 74 74/6 92-207
hotline@theben.de
Adresses, telefon numbers etc.
www.theben.de
GB
F
Technical data
Caractéristiques
Sensor element:
Capteur de tempéra-
PA-filament
ture: fil polyamide
Dehumidify
Deshumidifier
Humidify
Humidifier
Degree of protection
Degré de protection
Protection class
Classe de protection si
after correct mounting
le montage est correct
Permissible humidity
Plage de réglage
non condensing
sans condensation
I
NL
Technische
Data technici
gegevens
Elemento sensore:
Voeler element
poliamminico
Drogen
Deumidificazione
Bevochtigen
Umidificazione
Beschermingsfactor
Grado di protezione
Beschermingsklasse bij
Classe di protezione
correcte montage
dopo un montaggio corretto
Umidita max
Toelaatbare vochtigheid
zonder condensatie
non condensante
E
Datos técnicos
Elemento sensor:
bimetal
Deshumectar
Humedecer
Grado de protección
Clase de protección
tras montaje correcto
Humedad relevativa
máxima

Werbung

loading