Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications; Important Safety Precautions; Cleaning And Maintenance - Concept OL4010 Bedienungsanleitung

Babyflaschenwärmer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
EN
ACKNOWLEDGMENT
Thank you for purchasing a Concept product. We wish you much joy with your new appliance every day you use it.
Please read the instruction manual carefully before initial use. To refer to this manual any time you need to, we recommend you to
keep it in a safe place. And please pass it to any future owner of the appliance.

TECHNICAL SPECIFICATIONS

Voltage
220 V / 50 Hz
Input
200 W

IMPORTANT SAFETY PRECAUTIONS

• Do not use the appliance in any other way than as described in this manual.
• Remove all the covering and marketing materials from the appliance before the first use.
• Make sure the mains voltage corresponds to the values on the rating plate of the appliance.
• Make sure there is water in the bottle warmer. Dry running is prohibited.
• Do not touch the steam outlet during heating.
• Check the temperature of the food before serving food or milk to children.
• Do not heat the food for too long to avoid losing nutrients.
• Do not pour milk or drinks directly into the product.
• Do not clean, store or cover the appliance until it has cooled completely.
• Do not leave the appliance unattended when it is switched on or connected to the mains.
• Before connecting or disconnecting the appliance from the mains socket, make sure that the
switch is in the off position.
• When disconnecting the appliance from the wall outlet, never pull the power cord, grasp the plug
end and disconnect it by removing it from the receptacle.
• Do not allow children or unauthorized people to handle the appliance, use it out of their reach.
• Persons with reduced mobility, reduced sensory perception, mental disadvantage or persons not
familiar with the operation must use the appliance only under the supervision of responsible
person, who is familiar with the instructions.
• Pay extra attention if the appliance is used near children.
• Do not use the appliance as a toy.
• Before cleaning and after use of the appliance, switch the appliance off, disconnect it from
the mains and allow it to cool down.
• Do not let the power cord touch hot surfaces.
• Do not allow the appliance to hang on the power cord.
• Do not use the appliance in an environment where there are explosive gases and flammable
substances (solvents, varnishes, adhesives, etc.).
• Do not use coarse and chemically aggressive substances to clean the appliance.
• Do not use the appliance if it is not working properly, has been dropped, damaged or immersed in
liquid. Have it checked and repaired by an authorized service centre.
• Do not use the appliance with a damaged cord or plug and have it repaired immediately by an
authorized service centre.
• Do not wrap the power cord around the appliance body.
• Do not use the appliance outdoors.
• The appliance is only suitable for home use and is not intended for commercial use.
• Do not immerse the power cord, plug or appliance in water or any other liquid.
• Do not use any accessories other than those recommended by the manufacturer.
• Do not repair the appliance yourself. Contact an authorized service centre.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning the use of the appliance in a safe way and understand
the hazards involved. Cleaning and maintenance performed by the user must not be carried out
18
by children unless they are 8 years old and under supervision. Children aged under 8 years of
age must be kept away from the appliance and its power cord. Do not let children play with the
appliance.
Damages from failure to follow the manufacturer's instructions are not covered by the
warranty.
PRODUCT DESCRIPTION
1 Rotary knob
2 Container body
3 Stand
4 Container lid
5 Cup
A Target water/milk temperature
B Current water/milk temperature
Stand
Picture on the left - To heat milk, baby food or sterilize, place the stand with its surface facing down.
Picture on the right - To heat food, place the stand on its feet.
OPERATING INSTRUCTIONS
Heating
1. Before use, rinse the parts with clean water. Place the product in a horizontal position, insert the stand and then insert the
bottle with milk or baby formula or cup with food and add water. We recommend that the water level is half the level of the
milk/baby formula in the bottle, to heat the food add 400-500 ml.
2. Plug in the product and press the power button
the knob to the required heating position, the screen displays the current water temperature. When the indicator flashes, the
product begins to heat. When the indicator is steady on, the milk/food has reached the target temperature.
Sterilization
1. Insert the stand into the warmer.
2. Add 70 ml of water to the warmer and place bottles, pacifiers and other baby accessories in the stand, bottom up.
3. Plug in the product and press the power button.
- The indicator is flashing = sterilization has started
- When sterilization is complete, the product switches off automatically.

CLEANING AND MAINTENANCE

CAUTION!
Before each cleaning of the appliance, unplug the power cord from the electrical outlet! Make sure the appliance has cooled before
handling it! To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance! The food bowl and food lid can be washed with a detergent. Never clean the appliance under running
water, do not rinse it or immerse it in water!
To prevent limescale build-up, use clean water. If limescale builds up, you can use a limescale remover or acetic acid and add a little
water. Plug in the appliance, switch to
OL4010
OL4010
Display icons explanation
Power button
Milk heating (adjustable temperature 37-44 °C)
Milk formula (adjustable temperature 45-69 °C)
Food heating (adjustable temperature 70-90 °C)
Sterilization (target temperature 100 °C)
. The default setting is "Milk heating" with a temperature of 41 °C. Turn
and warm up for 5 minutes, then turn the appliance off and unplug it.
EN
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis