Troubleshooting - TFA 98.1082 Bedienungsanleitung

TFA_No. 98.1082_Anleit_11_14 04.11.2014
TIME BLOCK
– Digital alarm clock
6.6 Brightness
• Move the brightness adjusting switch (6) to change brightness in 3 steps (HIGH-MIDDLE-
LOW).
6.7 Reset
• If the unit does not work properly use a pin to press RESET button (10), then the clock will
return to the initial mode.
7. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect from
moisture.
• Keep the instrument in a dry place.
8. Battery
• Attention: The product only works with power adapter.
• CR2032 button cell is a back-up battery to maintain clock operation in the event of black-
out or other power failure.
• In case of battery replacement, observe correct polarity (+ pole above).
• Remove the battery if you do not use the product for a lengthy period.

9. Troubleshooting

Problems Solutions
➜ Connect unit to mains adapter
No indication
on the instrument
➜ Move the FUNCTION switch (4) to 'NORMAL'.
Incorrect display
➜ Use a pin to press RESET button (10)
If your device fail to work despite these measures contact the supplier from whom you pur-
chased it.
10. Waste disposal
This product has been manufactured using high-grade materials and components which can
be recycled and reused.
Never throw flat batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to
appropriate collection sites according to national or local regulations in order
to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
12
14:15 Uhr Seite 7
TIME BLOCK
– Digital alarm clock
This instrument is labelled in accordance with the EU Waste Electrical and Elec-
tronic Equipment Directive (WEEE).
Please do not dispose of this product with other household waste. The user is
obligated to take end-of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in order to ensure environmen-
tally-compatible disposal.
11. Specifications
Power consumption:
Power adapter: Input: AC 100 – 240 V ~50/60 Hz, 0.5 A max / output: 6.0V, 0.4 A
(included)
Backup battery: 1 x CR 2032 (included)
Housing dimension: 162 x 61 x 85 mm
Weight: 280 g (only instrument)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data
are correct at the time of going to print and may change without prior notice. The latest technical data and
information about your product can be found by entering your product number on our homepage.
www.tfa-dostmann.de 11/14
13