TFA 60.2513 Bedienungsanleitung Seite 11

Please take note of the following:

Recommended distance to any interfering sources like computer monitors or TV sets is at
least 1.5 - 2 metres.

Inside ferro-concrete rooms (basements, superstructures), the received signal is naturally
weakened. In extreme cases, please place the unit close to a window to improve the
reception.

During nighttime, the atmospheric interference is usually less severe and reception is
possible in most cases. A single daily reception is adequate to keep the accuracy
deviation below 1 second.
Operation

Press and hold the ▲ or ▼ button in the setting mode for fast running.

The instrument will automatically quit the setting mode if no button is pressed within 15
seconds.
Manual setting of the clock and the calendar

Press and hold the MODE button for three seconds.

24 hr will be flashing on the display.

Press the ▼ or ▲ button to choose 12 HR (AM or PM appears on the display after 12 h)
or 24 HR system.

Press the MODE button to make the settings in the following sequence: Hours, minutes,
seconds, year, month, day, and time zone (default: 0) and day-of-week language and.
Press the ▼ or ▲ button to adjust the settings.

Language for the week: German (GE), French (FR), Spanish (SP), Italian (IT), Dutch
(NE), Danish (DA), Russian (RU), and English (EN).

The time zone setting (+12/-12) is needed for countries where the DCF signal can be
received but the time zone is different from the German time (e.g. +1=one hour later).

The manually set time will be overwritten by the DCF time when the signal is received
successfully.
Display change time and date

Press the MODE button.

The date and the weekday appear in the display.
Setting of the alarm clock

Press the ▼ or ▲ button in normal mode.

The alarm time will be flashing.