Ec Declaration Of Conformity - Schneider Airsystems SGS 140-1/2 Originalbetriebsanleitung

GB
SGS 140 - 1/2"
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
1. Screw the connection on the exhaust air
hose (item 15) into the air inlet (Fig. 6a).
2. Pull the exhaust air hose over the ex-
haust air guide and slide on the hose
clamp with screw (item 16).
3. Tighten the screw on the hose clamp
(Fig. 6b).
1.7 EC Declaration of Con-
formity
Impact wrench
SGS 140 - 1/2"
Year of CE mark: 2008
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100;DIN EN 792;
BGR 500;
98/37/ EC (before 28.12.2009),
2006/42/ EC (after 29.12.2009).
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
I/ 4
Serial no.
T400018