Cleaning And Maintenance; Technical Specifications - Velleman RCQC2 Bedienungsanleitung

The quadcopter is flying erratically.
The blades are distorted.
 Replace the blades.
The blades spin while the throttle stick is at its lowest.
The throttle stick is incorrectly fine-tuned.
 Fine-tune the throttle stick correctly.
The quadcopter is flying erratically despite fine-tuning.
The blades are distorted.
 Replace the blades.
The motor(s) do(es) not work properly.
 Replace the motor(s).
The quadcopter is flying erratically after crashing.
The six-axis sensor is out of balance.
 Reset the quadcopter or leave it to rest on the ground for 15
seconds.

10. Cleaning and Maintenance

The quadcopter does not need any particular maintenance. However,
occasionally wipe it with a damp cloth to keep it looking new. Do not use
harsh chemicals, cleaning solvents or strong detergents.

11. Technical Specifications

transmitter channels .......................................................... 4
control signal .......................................................... 2.4 GHz
material ........................................ plastic and electronic parts
power supply
quadcopter ....................... rechargeable 3.7 V 150 mAh Li-Po
....................................... (incl., spare battery RCQC2/SP1)
transmitter .......................... 4 x 1.5 V AAA/LR03C (not incl.)
charging time ...................................................... 30-45 min
flying time ............................................................... 5-7 min
control range ........................................................... ± 30 m
charging mode ........................................ via USB cable (incl.)
dimensions ............................................ 13.2 x 13.2 x 2.8 cm
V. 01 – 20/01/2016
RCQC2
12 ©Velleman nv