Maintenance And Cleaning - Beko DS 7335 PX0 Bedienungsanleitung

6

Maintenance and cleaning

6.1 Loading Door Inner Surface
The hair and fibres that are separated from
the laundry during drying process is collected
by the Fibre Filter.
C
Fibres are formed during wearing
and washing clothes.
A
After each drying cycle, clean the
fibre filter and the inner surface
of the loading door.
C
You can clean the filter slot with a
vacuum cleaner.
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter) of the two
part fibre filter and remove it by pulling it
upwards.
• Collect the hair, fibres and cotton balls
with hand or with a soft cloth.
• Remove the second part (outer filter) by
pulling it upwards.
C
Ensure that hair, fibre and cotton
balls do not fall into the slot
where the filters are installed.
• Open both fibre filters (inner and outer
filters) remove the hair, fibre, cotton balls
with your damp hand or a vacuum cleaner
Dryer / User Manual
or a cloth.
• Clean both filters under water running in
reverse direction of fibre accumulation
or with a soft brush. Dry the filter before
placing it back.
• Insert the fibre filters on one another and
place it back in its place.
• Clean the loading door interior and its
washer with a soft damp cloth.
57 / EN