Connected Devices; Operating Environment - Renkforce 2751056 Bedienungsanleitung

Operating Instructions
Dual PS5 Controller Charging Dock
Item no: 2751056
1 Intended use
The product is a dual controller charging dock compatible with Playstation®5 controllers .
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
2 Delivery contents
■
Product
■
USB-C® to USB-A charging cable
■
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.

5.3 Operating environment

■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
3
www.conrad.com/downloads or scan the QR

5.5 Connected devices

■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Product overview
3
1
4
2
5
7 Installation
■
Gently push the side panels into the frame as shown in section:
[} 3].
■
The panels should be flush against the contoured frame.
8 Connection
Notes:
– The input voltage should be at least 5 V/DC 2 A so the product can charge two control-
lers simultaneously.
– Disconnect the USB charging cable when the product is not in use.
■
If you connect a controller with a battery level ≥80% it will not recharge. This is the bat-
tery protection feature engaging to prevent overcharging.
■
The LED lights will illuminate when the product is receiving power.
■
The product can be powered by connecting the included cable to a USB-A port on the
Playstation®5.
9 Charging
Note:
The product overcharge protection mechanism will prevent charging if you connect a con-
troller with a battery level of 80% or more.
10 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
11 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
1 Charging slot 1
2 Charging slot 2
3 LED light array
4 Side panel
5 5 V/DC 2 A power input
Product overview
Preconditions:
a
The product is connected to a suitable
power supply. See Connection [} 3].
1. Insert a controller into an available char-
ging slot.
2. The connected controller will indicate the
charging status.
à
Remove the controller from the char-
ging slot when charging is complete.