Herunterladen Inhalt Inhalt Diese Seite drucken

Power On/Off; Volume Adjustment - xjump XJ 200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
English
CHARGING
The speaker must be recharged when switched Off.
Insert one end of the power cord into the Type-C (11) port of the device and the other end USB into
the standard 5V
2A charging port; in charging the Led indicator(4) will blinking.
This device is inbuilt with charge protection circuit, which can be connected to PC or changer for
long time; it will take about 5h to charge the battery fully; the endurance of the battery depends
on low or high volume.
Note: When the battery is low, the device will emit a warning sound for a few times before
automatically turning off.
POWER ON/ OFF
To switch on the speaker, press and hold the button
(3) for 3 seconds.
To turn off the speaker, press and hold the button
(3) for 3 seconds.
Note: If there is without any operation, device will shut down automatically after 15 minutes.

VOLUME ADJUSTMENT

Press the key
(1) several times to decrease the volume, or the key
(7) to increase the volume.
BLUETOOTH
BLUETOOTH CONNECTION METHODS
1. Switch On the speaker, white Led indicator on button
(3) will blinking about 0.5 seconds/
time under bluetooth searching status;
15

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für xjump XJ 200

Inhaltsverzeichnis