KATEK ghost ONE Bedienungsanleitung Seite 13

5. Select the Standard user as the user role (for
everyday operation).
Note
System settings can only be made as the Service
user, see operating instructions.
6. Enter the password for the Standard user (from
access data letter).
After successful login, the
Overview is displayed.
There are now two quick start options for charging the
vehicle:
Access protection remains disabled, vehicle is
l
charged without authentication, see Charging a
vehicle without authentication (free charging).
Enable access protection and register the RFID
l
chip, see Registering the RFID chip.
Registering the RFID chip
DANGER
Risk of injury due to RFID sensor for persons
with cardiac pacemaker or defibrillator
If you use a cardiac pacemaker, maintain a dis-
n
tance of at least 60 cm from the RFID sensor on
the front panel.
If you use a defibrillator, maintain a distance of
n
at least 40 cm from the RFID sensor on the front
panel.
1. In the web app / mobile app, select Vehicle man-
agement, Approved list in the navigation.
2. Disable Free charging.
3. Select Add RFID chip.
4. Hold up the RFID chip to the RFID sensor (6) on
the front panel of the wallbox.
5. Wait until the RFID chip has been identified.
A beep sounds and the RFID LED (6) lights up
green briefly as soon as the RFID chip has been
successfully identified.
9