Silvercrest SKD 1000 A3 Bedienungsanleitung Seite 100

If you wish, you can activate the "Listen to input (digital monitoring)" option
(described in the next step) to monitor the audio signal via the PC speakers.
4. Click on the red "Record" button to start recording.
The following options are also available in the Recording window:

Pause: Clicking on this button temporarily stops the recording. To continue recording
after a pause, simply click once again on "Record".

Delete: Clicking on this button deletes the current recording.

Timer record: Click on this button to start timer-controlled recording. A new dialog
box is displayed in which you can define the start and end times for recording:
You can have the recording to start immediately, when an input signal is detected or
have the recording to start at a specific date and time.
On the other hand, you can have the recording not to stop automatically, to stop
automatically after a specific time of silence (in this case you have to set the silence
threshold value) or after a recording time you set.

Line in: This list contains the signal sources available on your computer. To record
digital audio data from your SilverCrest SKD 1000 A3, select "Master Volume"
(Windows VISTA/7) or "Microphone Array" (Windows XP).

Remove DC Offset: Some computer sound boards superimpose a DC voltage on
the audio signal. You can activate this option to remove the resulting DC offset.

Emulate phono preamplifier: This option is provided for recording from record
players and should be left deactivated for your SilverCrest SKD 1000 A3.

Listen to input (digital monitoring): Activating this option outputs the Line In
signal via the PC speakers. You should not, however, keep this option activated for the
entire duration of the recording, since this can result in audio dropouts during recording
on slow systems.
98
Cassette Digitizer SilverCrest SKD 1000 A3
English