Control Panel - MO-EL 9005 Bedienungsanleitung

management of the thermostat, the required temperature band must be set for
each hour of the seven days of the week.
5. The number 1 will appear on the display – this stands for the first day of the
week – along with the values from 0 to 23, which represent the hours of the
day. The + and - buttons can be used to move between the hours of the day.
Pressing the M button sets whether Comfort or Energy Saving mode is required
for the hour which is currently selected and flashing on the display. If Comfort
mode is selected, the hour in question remains visible; if Energy Saving mode
is selected, the hour in question will disappear from the display.
6. Select the required mode for each of the 24 hours of the day. Once you have
finished, press the P button again.
7. The number 2 will now be shown on the display, indicating the second day of
the week. Repeat the selection for all 24 hours, then continue, pressing P at the
end of each day. If the setting for the day is already correct as shown, simply
press the P button directly to skip programming.
8. Once all programming through day 7 has been completed, press P once more
to return to the main screen.
Once the two configuration types have been completed, for manual or automatic
management simply press the M button to change mode; this will be displayed on
the right-hand side of the screen:
- Automatic programming
- Comfort mode
- Energy Saving mode
- Holiday mode

CONTROL PANEL

The thermostat has certain default parameters which can be modified via the
control panel.
To access it, press and hold the Menu and Up buttons simultaneously while the
display is off.
Press the Menu button again to scroll through the following settings:
01) Temperature calibration: If the temperature readout on the display differs from
the actual ambient temperature, it can be calibrated by increasing or decreasing it
0.5°C at a time, up to a maximum of 8°C. The default value is 0.
02) T.Max: Maximum temperature which can be set. Ranges from 5°C to 80°C.
03) T.Min: Minimum temperature which can be set. Ranges from 5°C to 80°C.
04) Frost protection: Temperature at which the heating system connected to the
thermostat will be turned on to prevent freezing. It can be set to between 5°C and
15°C, or deactivated by selecting the position - -.
05) Hysteresis: Temperature interval beyond which the thermostat activates.
8