Maintenance; Environmental Protection - Kress KG633E Serie Bedienungsanleitung

extend the life time of the machine.
(See Fig.I)
WATERING
ATTACHMENT OF
ACCESSORIES
A number of accessories have been supplied with
this product and are required for use in different
applications. Do not attempt to use cleaning
without a lance or any accessories attached.
1. Soap bottle (KA2563, sold separately)
Soap bottle provides detergent suds for deeper
cleaning of dirt. It is used in conjunction with power
nozzle or extension lance. (See Fig. J1, J2)
NOTE: Keep the machine connected to water
source when using soap bottle.
2. Brush (KA2510, sold separately)
Brush is for cleaning cars, boats, motorcycles
etc. It is used in conjunction with power nozzle or
extension lance. (See Fig. K1, K2)
3. Turbo nozzle (KA2527, sold separately)
The turbo nozzle delivers 360° of rotating water,
which cleans a larger area than the 0° water pattern
during the same time period. Recommend to use it
with high pressure setting (See Fig. L)
14
4. Bottle cap connector (KA2588, sold separately)
EN
The bottle cap connector accessory allows the tool
to directly connect with most 2 Liter bottles with
approximately 1" openings. (NOTE: May not fit all
consumable soda and water bottles) (See Fig.M1,
M2, M3)
WARNING: Do not install the bottle cap
connector accessory until it is ready to be used.
The accessories vents will leak liquid, if a bottle is
installed, with the machine lying on a surface.
5. Pivoting Quick Connect Adapter (KA2529, sold
separately)
The Pivoting Quick Connect Adapter allows power
cleaning tips to be fully adjusted up to 180° in any
direction. Ideal for cleaning around hard-to-reach
areas. Suitable for the HYDROSHOT
cleaner and multi-spray nozzle (See Fig. O1, O2)

MAINTENANCE

Remove the Battery Pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
damaged or worn parts. Contact your supplier or
the manufacturer for replacement parts.
Hose filter maintenance
Remove the hose filter from the hose and get out
the strainer. Rinse the parts with clean water before
reassembling. (See Fig.N1, N2)
Filter screen maintenance
Remove the hose adapter to get the filter screen.
(See Fig. P1, P2) Rinse it with clean water before
reassembling.
NOTE: When retightening the hose adapter, please
tighten securely. Otherwise, it may not draw any
water for proper operation.
representative.
CLEANING/STORAGE
Before Storage, completely drain all the water from
the machine and hose.Clean the moulded plastic
housing of the machine using a soft brush and
clean cloth. Do not use water, solvents or polishes.
Store in a secure and dry place out of the reach of
children. Do not place other objects on the product.
Store the machine and the accessories in a frost free place.
ENVIRONMENTAL
PROTECTION
local authorities or retailer for recycling advice.
power
TM
WARNING: Any other servicing should be
performed by an authorized service
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your