Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Marmitek FM10 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
My modules will not respond to my controller.
Make sure that the House Code on all Modules and Controllers are set to the same House
Code (A .. P).
My modules will not react to my remote / sensor.
When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek
X-10 Security Console installed in your house. These components will translate the radio signals
to the Marmitek X-10 signal on the power line. Using several remotes and sensors, you only
need one central transceiver.
Am i able to increase the range of my remotes by using more transceivers?
Yes, you can use more than one TM13 Transceiver in your home when the range of your
remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to
be disturbed when more than one TM13 is transmitting. TM13's will wait for a quite power line
before transmitting their data. To prevent your Marmitek X-10 System to become slow or to
prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far
away from each other as possible.
Do you still have questions? Please check out www.marmitek.com for more
information.

teCHniCAl SPeCiFiCAtiOnS

Power supply:
Maximum load:
Damping at 120kHz:
Input impedance:
Ambient temperature:
Dimensions:
environmental information for Customers in the european union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its
packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should
be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and
other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For
more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal
service, or the shop where you purchased the product.
6
230 VAC, 50 Hz
3600 Watts
14dB
7 Ohm (P-N) at 120 kHz
–10°C to +40°C (operation)
-20°C to +70°C (storage)
52x122x33mm
© MArMiteK

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis