ORORO HEATED APPAREL Bedienungsanleitung Seite 3

ENGLISH
OPERATING INSTRUCTIONS
Heating zones
Power cable
Battery zipper pocket
Locate the battery zipper pocket and the power cable on the inside of the apparel.
Insert power cable into the designated port on the battery.
To power on, press and hold the power button on the GARMENT (usually located on the left
3
chest area) for three seconds.
Heating zones* are now activated, and the apparel begins to preheat for five minutes (power
button/logo illuminates and flashes red). When fully preheated, the apparel will automatically adjust
to medium heat (power button/logo illuminates solid white).
*Diagram is for reference only; number and location of heating zones may differ depending on the style of apparel.
The heating level can be adjusted by a short press of the power button. To indicate the setting has
changed, the logo/power button will cycle through solid red, white and blue illumination with each
press.
PRE-HEAT HIGH MEDIUM LOW
BLINKING RED SOLID RED SOLID WHITE SOLID BLUE
To power off, press and hold the power button for three seconds until the lighted logo/power
4
button turns off.