Install The Batteries; Manual Operation; Other Information - FLINQ FQC8276 Bedienungsanleitung

Manual
EN

Install the batteries

1 Batteries (not included)
The sensor bin works on 4 x
AA batteries (not included).

Manual operation

1 Open / close
Push the "hand" icon button to open and
close the lid manually.
2 Take out battery compartment
Unscrew the cap (turn left) from the
battery compartment.
Don't press the lid
!
Don't press the lid when it is opening or
closing. This can damage the motor.
3 Place batteries
Place the batteries in the compartment.
Make sure you place the batteries in the
right way + and -.

Other information

1 Change batteries
When the LED is flashing under the
battery icon it means that you need to
change the batteries.
FlinQ Peak Sensor Bin
4 Place compartment back in
Place back the battery compartment.
Make sure you put it the right way in as
marked on the compartment. Screw the
lid back on.
2 Avoid sunlight
Avoid sunlight on the sensor panel. This
can damage the electronics.