Technical Specifications - Metabo RSEV 19-125 RT Originalbetriebsanleitung

en ENGLISH
To protect the environment, do not dispose of
power tools with household waste. Observe
national regulations on separated collection
and recycling of disused machines, packaging and
accessories.

14. Technical specifications

Explanation of details on page 3. Subject to change
in line with technical advances.
D
= max. diameter of accessory
max
t = Max. permitted thickness of clamping
max,1
shank on accessory when using
clamping nut (6)
M = Spindle thread
l = Length of the grinding spindle
n* = No-load speed (maximum speed)
P = Nominal power input
1
P = Power output
2
m = Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
* Energy-rich, high-frequency interference can
cause fluctuations in speed. However, the fluctua-
tions disappear as soon as the interference fades
away.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
accessory or power tool. In estimating the values,
you should also include work breaks and periods of
low use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission level
h, S
(grinding)
K = Uncertainty (vibration)
h,...
Typical A-effective perceived sound levels::
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
14