cecotec bolero COOLMARKET COMBI 250 WHITE D Bedienungsanleitung Seite 71

When the cooling system is switched on for the first time, all icons on the display light up for
2 seconds.
The temperature can be adjusted by pressing the key '
the indicator of the current mode will switch off while the indicator of the next mode will light
up, and the mode setting will be confirmed if no key is pressed within 5 seconds (otherwise
the mode setting will be invalid). After the setting has been made, the temperature will be
immediately controlled according to the mode setting.
Fig. 3
1. Fast Cool icon
2. Temperature level icons
3. Temperature level selection
The temperature mode cycle is as follows: "5→4→3→2→1→FAST COOL→5"
COLDER 5 When you need a cooler temperature.
4
3 Normal use.
2 When you don't need a cooler temperature.
1
COLD
Adjusting the freezer compartment temperature
The temperature of the freezer compartment can be controlled by turning the knob as follows:
- When the temperature mode remains unchanged, turn the temperature knob clockwise–
the temperature of the refrigerator compartment will decrease while the temperature of
the freezer compartment will increase.
- When the temperature mode remains unchanged, turn the temperature knob
counterclockwise–the temperature of the refrigerator compartment will increase while
the temperature of the freezer compartment will decrease.
- It's recommended to set the temperature knob to the middle position. When a lower freezer
temperature is required, turn the temperature control knob properly counterclockwise to
decrease the freezer compartment temperature (note that the refrigerator compartment
temperature will increase simultaneously). When the desired temperature is reached, be
sure to properly turn the knob back to the middle position.
Fig. 4
The refrigerator thermostat and the air regulator must be used together.
'. Every time the key "
BOLERO COOLMARKET COMBI 250 WHITE D / INOX D
ENGLISH
" is pressed,
71