Identifying The Parts; Wireless Subwoofer - Hisense U5120GW Kurzanleitung

2

Identifying the Parts

7 8 9
1
(ON/OFF) button
7 8
State Action
On
Semi
Press
Standby
once
Eco
Press and
Standby
hold
5 seconds
2
(SOURCE) button
Select the play function.
3
VOL+/VOL- buttons
Increase/decrease the volume level.
4
Wi-Fi LED indicator
LED State
Blink
Double blink
Constant on
5
Display Window / Remote Control Sensor
Show the current status.
Receive signal from the remote control.
6
Screws
Remove the screws then install the wall mounting
screws into the back of the unit.
7
PF (Wi-Fi Setup) button
• Trigger Wi-Fi setup for Play-Fi.
• Press and hold the button :
8 seconds
Wi-Fi Access Point (AP) mode
3 seconds
Wi-Fi Protected Setup (WPS) mode
8
USB Socket
Insert the USB device to play music.
10 11 12 13
9 10 11 12
Function
• Follow source state
• Wi-Fi is still on.
• It still supports Play-Fi and
Airplay2.
• Wi-Fi is off.
• The product enters the lower
power consumption mode.
• Restarting the system will
take a relatively longer time.
Status
Wi-Fi Access Point (AP) mode
Wi-Fi Protected Setup (WPS) mode
Connected / Paired successful
1
1
6
6
9
TYPE-C Socket
For the Dongle of wireless rear surround speaker.
13
separately. This port can't be used to connect to
other Type C devices.
10
OPTICAL Socket
Use to connect to the OPTICAL OUT socket on an
external device.
11
COAXIAL Socket
Use to connect to the COAXIAL OUT socket on an
external device.
12
HDMI OUT (TV eARC/ARC) Socket
The port for connecting a TV. The port supports the
eARC/ARC HDMI feature, which allows the soundbar
to play audio that originates on the connected TV.
13
HDMI IN (1/2) Sockets
Two HDMI ports for connecting HDMI source devices, such
as a DVD player, Blu-ray Disc™ player, or gaming console.
Note that only one HDMI input is usable at a time.
14
AC~ Socket
Connect to power supply.

Wireless Subwoofer

1 AC~ Socket
2 PAIR button
3 PAIR Indicator
2 3
2 3
5
5
14
The surround kit needs to be purchased
1 2
1
4
4
14
3
2 3