Maintaining The Battery - Smartmi Vortexwave Bedienungsanleitung

Cleaning the guide wheel/universal wheel
Remove the water tank.
1
Turn over the robot and pry out the guide wheel/universal wheel with a small
2
screwdriver or other flat tool.
After removing hair and any other foreign matter from the wheel axle, put the
3
wheel body back in place and press on it firmly.
Note: It is recommended that the guide wheel or universal wheel be cleaned as needed. To avoid damaging
the robot, avoid prying out the guide wheel and universal wheel too frequently.

Maintaining the battery

Shutting down the robot
When the button does not respond or
the robot cannot be shut down, long
press
down.
19
The robot comes with a built-in high-
performance rechargeable lithium-
ion battery pack. In order to maintain
the battery performance, please keep
it charged every day.
Shut down and pack the robot away
if you do not intend to use it for an
extended period of time. Charge it at
least once every 3 months to avoid
damage to the battery due to over-
discharge.
for 5 seconds to forcibly shut it