HURAKAN HKN-BLW3 Bedienungsanleitung Seite 13

ATTENTION! If the glass is installed incorrectly, the equipment cannot be switched on.
Make sure the glass is firmly fixed on the motor unit.
11. It is not allowed to turn on the equipment idly (i.e. with an empty glass).
12. It is not allowed to put metal objects (knives, forks, spoons, etc.) in the glass.
13. When filling the glass, consider the fact that the volume of fluffed mixture gets bigger. The
glass must not be overfilled.
14. As the motor is rotating at high speed, to avoid the displacement of the glass, it is
recommended to hold the cover during processing.
15. During operation, the blender cover must be closed. Do not try to open the cover and put
your hands or other objects into the blender glass while the engine is running.
16. It is not allowed to remove the glass when the equipment is turned on. The glass should
only be removed when the engine has stopped completely.
17. The energized equipment shall not be left unattended. Do not give the equipment to
children and do not use it near children!
18. Maintenance of energized equipment is prohibited.
19. Washing of the motor unit under a direct water stream or submergence thereof into
water or any other liquid is not allowed.
20. When handling a knife, the operating staff shall be very careful as it is very sharp.
21. In case of any failure, service professionals shall be contacted.
EN
13