Safety Instructions - Indu-Sol PROmesh P20 Schnellstartanleitung

Safety Instructions

Before putting the PROmesh P20 into operation, check whether it is in perfect condi-
tion externally. Always observe the technical specifications of the device to ensure safe
and optimal use. The PROmesh P20 is designed for IP30 protection environments. Take
appropriate measures to ensure proper operation of the unit in a different environment.
! WARNING In case of suspected damage, please return the PROmesh P20 immediately to your
supplier and do not put it into operation.
Do not open the housing under any circumstances. Unauthorized opening of the
housing will void any warranty claims.
Scope of Delivery
• PROmesh P20
• 7-pole pluggable 5 mm terminal block (power supply and alarm contact)
• Quickstart User Guide (hardcopy)
• SD Card, can be used for backup and updates
Insert the SD card into the slot provided on the back of the PROmesh P20 before the
first start-up.
! NOTE
Mounting on the DIN Rail
Mount the PROmesh P20 upright in the switch cabinet on a on a 35 mm DIN rail (DIN
EN 60715).
! NOTE The following distances to other modules must be observed:
• right / left: 20 mm
• top / bottom: 50 mm
12
ENGLISH
! WARNING
Power Supply
! WARNING
Configuring a Network
Connection
! NOTE
Do not mount the PROmesh P20 directly next to devices that generate strong electro-
magnetic interference fields or constantly emit heat to their surroundings. Also protect
the PROmesh P20 from intense sunlight.
The PROmesh P20 is operated with a redundant DC voltage of 12 – 48VDC, Connect a
suitable power source to the labeled terminals of the 7-pin 5,0 mm terminal block.
Connect the positive lead to one of the VDC contacts and the ammunition lead to the
corresponding GND contact.
If the external power supply is correctly connected and activated, all status LEDs of the
PROmesh P20 will light up briefly. After a short initialization phase the LEDs go out and
the device is ready for operation and can now be configured in the network.
Do not mount the PROmesh P20 directly next to devices that generate strong electro-
magnetic interference fields or constantly emit heat to their surroundings. Also protect
the PROmesh P20 from intense sunlight.
Download the Service Tool to your client PC (Windows). You can find the software on
our website:
https://sdx.indu-sol.com/s/fZDLQTyzLPg9RPR
Our software is updated regularly. Please, make sure you are using the latest version.
Connect the PC to a suitable data line on one of the data ports (P1 – 16, G1 – G4).
ENGLISH
13