Product Overview - Cartrend 11158 Originalbetriebsanleitung

Danger of injury!
• Do not modify or tamper with the product, otherwise there is an in-
creased danger of injury.
• Do not leave the device running unattended.
• The high-pressure hose becomes hot during use. Therefore allow it to
cool down before touching it and rolling it up.
• Do not use the compressor for more than 10 minutes. Then allow it to
cool down for approx. 10 minutes. Overheating and permanent damage
may otherwise occur.
• Please also note the operating instructions of connected devices.
Special notes
• Do not inflate objects beyond the intended or specified pressure. The
object could burst.
• Never inflate larger objects such as lorry or tractor tyres, air mattresses
or rubber boats. This exceeds the delivery rate, thus the run-time of the
compressor.
• The pressure specifications of the manometer are reference values.
Check the pressure with a calibrated air gauge.
• The max. pressure of 100 PSI (7 bar) will only be reached if the pump
volume is not greater than 0.5 L.

Product Overview

Overview of controls see page 2.
1. Carrying handle
2. Charge state LED
3. 12 V car socket
4. USB port
5. "USB / TEST" button
6. "ON/OFF" dial
7. Reverse polarity protection LED
8. Mains socket
9. Red cable with clamp (+)
10. Black cable with clamp (-)
28
11. Compressor On/Off switch
12. Pressure gauge
13. Valve for sports balls
14. Valve for inflatable toys
15. Storage compartment
16. High-pressure hose
17. Valve quick coupling
18. Connecting plug
19. Power supply with 230 V power
plug
Jump Starter