Technical Data; Before Starting The Equipment - EINHELL TE-DW 225 X Originalbetriebsanleitung

4. Technical data

Voltage .................................... 230-240 V ~ 50 Hz
Power rating ............................................. 750 W
Sanding surface, round .......................Ø 225 mm
Sanding surface, angular ... 285 x 285 x 285 mm
Idling speed (round) .....................600-1800 min
Oscillating speed (angular) ........2400-7200 min
Telescopic tube ............................ 1100-1650 mm
Protection class: ............................................ II/
Weight: .......................................................3.7 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 85 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 96 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
Anl_TE_DW_225_X_SPK9.indb 16 Anl_TE_DW_225_X_SPK9.indb 16
-1
-1
&
= 9.19 m/s
2
h
2
- 16 -
GB
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Assembling the drywall sander (Fig. 2)
Take the drywall sander out of the packaging,
unfold it and secure with the locking hook (9).
Make sure that the locking hook (9) engages
correctly.
5.2 Fitting the telescopic extension (Fig. 3)
Insert the telescopic extension (4) into the lock for
the telescopic extension (3) and lock it by twisting
as shown in Fig. 3.
Note:
Adjust the drywall power sander with the
telescopic extension (4) so that you can work
with it most comfortably. Observe the „Max" mark
on the telescopic extension: This must not be
exceeded.
5.3 Connection for dust extractor (Fig. 4)
Insert the dust extractor hose (6) into the dust
extractor mount (a) and lock it by twisting as
shown in Fig. 4. Dust is extracted directly through
18.02.2019 08:21:20 18.02.2019 08:21:20