Herunterladen Diese Seite drucken

Weidmuller 8808360000 Bedienungsanleitung Seite 6

Werbung

19a
Um den Potentialausgleich der Module zu
gewährleisten, muss die Tragschiene über eine
Erdungsklemme (z. B. WPE 4 Bestell-Nr.
1010100000) mit dem Potentialerder verbunden
werden . . .
To ensure the earthing of the modules the
DIN rail must be connected to earth (e.g. WPE 4
P/N 1010100000) using an earthing clamp . . .
19b
. . . Hierzu diese einfach auf die Tragschiene auf-
setzen, festschrauben und am Potentialausgleich
anschließen.
. . . Clip the earthing clamp on to the DIN rail,
fasten the screw and connect it to earth.
Demontage • Disassembly
Öffnen des Gehäuses
Gehäuseoberteil mittels eines Schraubendrehers
lösen und entfernen.
Opening the Housing
Unclip the upper housing part with a screwdriver
and withdraw it.
Entfernen des Moduls
Die Gehäusewände leicht nach außen drücken
und das Modul entnehmen.
Removing the Module
Press the housing walls slightly outwards and
remove the module.
6

Werbung

loading

Diese Anleitung auch für:

Ie-xm-rj45/idc-bbIe-xm-rj45/idc8891980000